The CPScreen automatically separates small fibers from containers, and 2D from 3D material, easily and efficiently. Small screen openings decrease loss of fiber to container line, recovering even the smallest pieces of fiber. CP’s long-lasting rubber cam-style discs are specially engineered to have consistent spacing at all points at all times to make discs highly resistant to both jamming and wrapping. Cam discs also have low amplitude that avoids aggressive separation to keep fiber clean of small containers and other contaminates. CP’s screens ensure that material is sized properly for the most efficient sort possible.


Features & Benefits:

  • Cam-Discs are highly resistant to jamming and wrapping- 80%+ reduction in wrapping and needed maintenance
  • Variable frequency drive motors
  • Small screen openings minimizes loss of small fibers to container line
  • CP Syncdrive™ uses carbon fiber timing belts drive rather than chains, eliminating the need for oilers, tensioners or adjustments, while reducing wear, maintenance, and noise
  • Bolt in “spindle” shafts allow for easy removal or replacement without removing side panels
  • Disc are in an assembly of 5 discs; one bolt per disc assembly allows fast disc replacement
  • Electronic deck angle hydraulically adjustable in 1degree increments from control panel
  • Designed around safety: harness connection, a hydraulic maintenance floor, lock-out tag-out, and mechanical lock on shafts



Paper Recycling Equipment


The CP NEWScreen is engineered to effectively separate larger fiber from mixed paper, containers, dirt and debris. Our patented long-lasting finger disc technology ensures efficient separation and higher throughput paired with the lowest maintenance in the industry.

Features & Benefits:

  • Automatically separates large fiber from mixed paper, containers and debris
  • Patented one-piece, single-bolt, molded-rubber finger discs allow for greater separation efficiency with long disc life
  • Easy and fast replacement of rubber  finger discs without removing the shaft
  • Lowest disc cost per ton
  • “Universal shafts” with preset disc spacing configurations at 6”, 8” and 10” allows screen to be reconfigured easily to target different size fiber and increase throughput
  • Four individually adjustable, variable speed rotor drives to optimize separation
  • CP Syncdrive™ uses carbon fiber timing belts rather than chains, reducing wear, maintenance, and noise and eliminates the need for oilers, tensioners or adjustments
  • Low labor maintenance, easy installation and integration
  • Variable speed drives and hydraulically adjustable deck, ease angle changes quickly
  • Designed around safety: harness connection points exceed CE and OSHA standards, a hydraulic maintenance floor extends on demand to provide safe access, lock-out tag-out trapped key system, and mechanical lock on shafts prevents “roll back” of shafts during maintenance


CP Manufacturing’s patented V-Screen™ Separator is a technological advancement that has changed the shape of single-stream processing.Two separating decks angled in a space-saving trough configuration effectively separate fibers and containers. The V-Screen’s™ unique dual decks fold vertically to allow for easier, safer maintenance access. Improved discs last up to three times longer than other discs on the market and have a higher co-efficiency of friction than ever.

Features & Benefits:

  • Increases system processing capacity
  • Reduces labor costs
  • Reduces residue by capturing more recyclables
  • Easier, safer maintenance with the lowest costs in the industry
  • Best separation efficiency available
  • Exclusive hydraulically actuated, electronically controlled deck angle and machine pitch quickly accommodate your processing needs
  • Patented traction-control air system applies a light bed of air to top of fiber stream, minimizing roll back and maximizing fiber/container separation
  • Patented disc technology with long-lasting two-piece, bolt-together molded rubber discs with metal inserts allow for easy maintenance or removal
  • Exclusive square-tube steel shafts minimize wrapping and require minimal cleaning
  • Variable speed drives



Get started on your recycling or waste project today, Trust the Leader

Talk to an Expert

The CP Group
CP Group Team

We are your single resource for all waste & recycling separation needs, from the tipping floor to baler storage area and everything in between.


CP Testimonials

No one says it better than our customers! Hear what real customers are saying about our exceptional service, machine quality and delivery on expectations!

Read More…


The McMRF is our affordable small single stream sort system, designed to process and recover materials at about 10TPH for smaller communities.



Copyright © 2012 CP Manufacturing, Inc.